Kormány Adapterek – Logitech, Fanatec, Moza, Simagic adapterek

Logitech 70mm adapter

madlali — Wed, 19 Feb 2025 17:19:20 +0000

Logitech 70mm steering wheel adapter – new possibilities for your Logitech base

With the adapter, you can easily mount your favorite 70mm bolt pattern steering wheel onto your Logitech G29, G920, or G923 base! We include all the necessary screws with the adapter. The adapter is tall enough that steering wheels with an encoder can still be used.

Steering wheels compatible with the 70mm Steering Adapter:

Every 70mm bolt pattern (PCD) racing steering wheel, like Momo, OMP, Sparco, Nardi, etc. can be browsed in Hungary, for example at Race-shop among racing wheels.

Installing the Logitech steering wheel adapter:

You can attach the adapter to your Logitech base in just minutes. You'll need a screwdriver and an Allen key for the installation. Our video below will help you install the wheel adapter, with the only difference being that at the end, instead of screwing the F1 wheel nut onto the original wheel hub, you'll be attaching the adapter:

Get set up in minutes: With our video, you can have your base race-ready in no time!

Check out our other Mods too!

Simagic/Moza Compatible Adapter

F1 Nova

Sequential shift mode

Removable sticker

Logo sticker

A Logitech 70mm adapter bejegyzés először EvoSim-én jelent meg.

Emulator for Fanatec Bases

madlali — Fri, 07 Feb 2025 06:12:56 +0000

Fanatec Wheel Emulator - New possibilities in the Fanatec system

Paired with our gear shifters and steering wheel emulator, you can use EvoSim and other brands' wheels with your Fanatec base

Fanatec bases don’t allow force feedback without a Fanatec wheel, so custom wheels either don’t work or only work with expensive hubs.
By using our emulator, your Fanatec base will see it as if a Fanatec wheel is connected, enabling force feedback.
This way, you can also use custom wheels on your Fanatec base.

Using the product:
Just plug it into the base-side quick release, and the base will immediately enable the force feedback.

Compatibility: The emulator is compatible with the following bases:

CSL DD, GT DD Pro
ClubSport CSW V1, V2, V2.5
CSL Elite
Podium DD1, DD2

The emulator is not compatible with the latest databases:

Clubsport DD, DD+, Podium DD

We only tested the emulator on a PC!

Ha Fanatec bázisoddal bármilyen utángyártott kormányt szeretnél használni, akkor a nálunk elérhető Fanatec kormány emulátor mellett szükséged lesz egy ilyen menetátalakítóra is.

The adapter converts the Fanatec QR bolt pattern (71mm) to a standard bolt pattern (70mm).

Compatible with QR1 and QR2 as well.

Accessory: 6 pcs M5x10 Screw and washer

So what do you need to be able to use any 70mm wheel on your Fanatec base while keeping your Force Feedback?

Fanatec Wheel Emulator: Our emulator enables ForceFeedback on your base. In the Fanatec control panel, your base will show up as if a wheel were connected.
Fanatec QR1/QR2, whether metal or lite version.
Fanatec Thread Adapter: Converts Fanatec thread pattern to standard 70mm pattern. You need it so you can screw your QR onto your steering wheel. Available in plastic and metal versions. Definitely choose the plastic version for a plastic QR, because of the knob on the QR.

With these, you can use either EvoSim or other manufacturers' steering wheels on your Fanatec base without worrying about Force Feedback.
Attention! If the emulator is plugged into the base and you want to connect a Fanatec wheel, remove the emulator first because it takes up the pin slots.

A Emulátor Fanatec Bázisokhoz bejegyzés először EvoSim-én jelent meg.

Simagic/Moza Compatible Adapter

madlali — Wed, 05 Feb 2025 06:33:06 +0000

Simagic- and Moza-compatible wheel adapter that lets you use any Evosim or other standard 70mm bolt pattern wheel with your base.

Check out our selection of steering wheels as well, for which you can buy the adapter at a discounted price.

The adapter includes both the female and male sides. You can use the male side, for example, to display your unused steering wheels on a wall or in a cockpit.

High quality; there is no wobbling, even after prolonged use.
The adapter does not support data connectivity, so it cannot be used with an Xbox (e.g., on the Moza R3).

The product comes with a 1-year warranty.

A Simagic/Moza Kompatibilis Adapter bejegyzés először EvoSim-én jelent meg.

Fanatec Thread Adapter

madlali — Tue, 04 Feb 2025 20:54:59 +0000

A treasure trove of new possibilities in the Fanatec system

Paired with our Fanatec Steering Wheel adapter and Steering Wheel emulator, you can use EvoSim and other manufacturers' steering wheels with your Fanatec base.

What is the Fanatec wheel adapter for?

The adapter converts the Fanatec QR bolt pattern (71mm) to a standard bolt pattern (70mm). With this adapter, you can attach a 70mm EvoSim or other brand steering wheel to a Fanatec QR1 or QR2 quick release.

Available in plastic and anodized aluminum versions as well.

Plastic: With pressed-in thread inserts, heavy-duty version – definitely choose this for QR Lite, since it's designed here for the FFB limiter nub on the QR
Anodized aluminum: Provides a minimalist look

If you want to use any third-party wheel with your Fanatec base, besides the Wheel Emulator we offer, you'll also need an adapter like this.

Compatible with QR1 and QR2 as well.

Accessories: 6 pcs M5x10 screws and washers for attaching your QR to the adapter

Plastic version

Pressed M5 inserts. Definitely choose this for the QR Lite!

Anodized aluminum finish

With a black anodized surface

Product dimensions

A Fanatec Menetátalakító bejegyzés először EvoSim-én jelent meg.